Keeping a bong clean does not require complicated equipment. Remove old water, resin and other residue regularly to make the glass easier to maintain and prevent joints from sticking. Below are eight steps for cleaning a glass bong. Follow cleaning-product safety instructions, keep away from flames and allow every part to dry completely before use.
1. Prepare your cleaning supplies
- Isopropyl alcohol (for glass parts only, following the product instructions)
- Ordinary sea salt or Epsom salt
- A suitable sealable container or bag
- Lukewarm or moderately warm water for rinsing
- A soft brush, cleaning brush or cotton buds
- Suitable silicone stoppers or other leakproof opening covers
Safety: isopropyl alcohol is highly flammable. Use it in a well-ventilated area away from flames, hot surfaces and ignition sources. Do not heat alcohol or mix it with hot or boiling water. Keep cleaning products out of children’s reach.
2. Empty the old water and rinse out loose residue

Pour out the used water and rinse the bong with lukewarm water. Remove visible loose debris. Avoid suddenly exposing cold glass to very hot water, as the temperature change can damage it.
3. Remove detachable glass parts

Carefully remove the bowl and downstem if they are detachable. Do not force stuck joints or pry them with metal tools. Place small glass parts in a separate suitable container.
4. Clean the glass with isopropyl alcohol and salt

At room temperature, pour a little isopropyl alcohol into the glass bong and add a small amount of coarse salt. The alcohol helps dissolve resin, while the salt provides gentle mechanical cleaning. Do not add hot water or use the mixture near flames or hot equipment. Follow separate manufacturer instructions for plastic, wood and silicone parts.
Smaller glass parts can be cleaned separately. Use a container compatible with the cleaner and avoid splashing, spills and breathing in vapour.
5. Let residue soften and move the glass gently

For heavy buildup, allow the cleaning mixture some time to work. With suitable covers in place, move the glass gently. Hold it securely and close openings so the liquid cannot splash out.
6. Remove remaining residue and rinse

Use a soft brush or cleaning swab for hard-to-reach areas. Rinse glass parts thoroughly with clean lukewarm water until cleaner residue and odour are gone. Avoid abrasive metal brushes and excessive force.
7. Let the glass dry completely
Place washed parts on a clean surface and let them dry completely. Before reassembly, check that no cleaner residue remains and all alcohol vapour has dispersed.
8. Maintain it regularly

Change the water after use and clean glass parts according to use and visible buildup. Regular maintenance makes stubborn residue easier to avoid and helps keep glass joints in good condition.
Do not use cracked or damaged parts. Cleaning maintains a bong, but it cannot make broken glass safe.
For isopropyl alcohol’s flammability, see the US National Institute for Occupational Safety and Health (NIOSH) safety information.
